รหัสสินค้า : 3671N

The Jenco Instruments 3671N is a 1/8 DIN panel-mount pH and ORP (Oxidation-Reduction Potential) monitor and controller.

Key Specifications & Features

• Display: 0.56-inch red LED display
• Ranges:
• pH: 0 to 14.0 pH (0.1 resolution, ±0.1 pH accuracy)
• ORP: -1990 to 1990 mV (10 mV resolution)
• Temperature: 0 to 100 °C (Pt-100 ATC, 1 °C resolution/accuracy)
• Electrical & Output:
• Dual SPDT Hi/Lo relays (rated 8 A at 115 VAC, 4 A at 230 VAC)
• Analog voltage/recorder output
• BNC input with input impedance >10¹² ohms
• Power: 115/230 VAC
• Dimensions & Weight: 96 x 48 x 172 mm, 690 grams (housed in a 1/8 DIN case).

3671N

pH or ORP monitor/controller, analog voltage output , 2 relays, red LED display with pt-100 ATC.

Description

1/8 DIN panel mount pH/ORP controller with dual SPDT Hi/Lo relays, manual set points and calibration are via potentiometers. Features a voltage/recorder output and an internal pH/ORP select switch. Display is a large bright red LED. Connectors are a BNC input and spade lug screw type connector block. Meter requires a Pt-100 ATC or a simulation resistor for temperature. Power115/230 VAC.

• All solid state design
• Low cost
• Easy to install
• Set points on front panel
• Recorder output
• 0.56 high efficiency red led display
• 1/8 DIN aluminum case
• Set points cover entire span
• ATC for pH 0 to 100 °C
• Internal pH/ORP select switch
• Low power consumption design, reduced internal heating thus increased reliability